DIY-ing an artificial putting green in San Antonio, TX is not a good idea. It could save you a couple of bucks from the expert installation fee. But it’s also likely that you’ll set yourself up for problems that make it less fun to play on your putting green.
Reasons NOT to DIY Your Putting Green
Still think you should set up your backyard putting green on your own? Before you commit to it, consider the following:
It’s Not Easy
Setting up a synthetic putting green is more than just laying down the turf and calling it a day.
- Remove everything on it, such as grass, weeds, plants, and rocks.
- Remove around 3-4 inches of the topsoil.
- Compact the ground and make sure it’s level.
- Set up a drainage system.
- Lay down and water the base, which could be rock, gravel, or granite.
- Install a weed membrane.
- Lay down the artificial grass and tape its seams together.
- Create golf holes and course obstacles if you want.
- Trim off unnecessary synthetic turf.
- Secure the perimeter of the putting green.
- Lay down the turf infill, which is usually sand for putting greens.
- Brush up the grass to fluff it up.
The process could take days, especially if it’s your first time doing it. And the steps vary depending on the surface you’re installing the turf on. For example, if you’re setting up a putting green on concrete, you’ll need to add foam pads to it so that the artificial grass will stick. You also have to do other tasks.
But if you’re not ready to put this much work into your putting green in San Antonio, TX, it’s better to leave the job to expert installers!
You Might Make Costly Mistakes
Even if you have a lot of DIY experience, you’re still likely to make mistakes while setting up your artificial putting green.
Here are some of the mistakes most people make when installing golf turf for the first time:
Not Ensuring Proper Drainage
Without proper drainage, your synthetic putting green will be more likely to form puddles. After all, excess water will have nowhere to go.
Not Investing in a Weed Barrier
A weed barrier blocks out weeds that would otherwise grow through the artificial grass and damage it.
Laying It Down On an Uneven Surface
If the surface is uneven, your putting green might warp or develop seams over time. Unfortunately, if you do make this mistake, you’ll have a lot of steps to redo to correct it.
Not Securing the Seams Properly
When you don’t do this properly, there may be gaps between seams and this can lead to premature wear of your synthetic putting green.
Not Securing the Perimeters
If the perimeters of the green don’t stay in place, water and debris could get in and damage the artificial grass in San Antonio, TX.
Not Installing Golf Turf Infill
Without infill material, the synthetic turf could shift around during playtime and keep it from maintaining the ideal stimp rating.
DIY-ing Might Cost You More
Maybe you’re thinking that if you get a synthetic putting green, all you have to do is buy the turf and roll it out. But there’s more to it than that.
You’ll need supplies, tools, and equipment to do it properly. They include:
- Sub-base Material
- Weed Membrane
- Tape Measure
- Carpet Knife
- Ground Pins
- Grass Glue
- Joining Tape
You probably have some of these things at home, but those that you don’t, you’ll either have to buy or rent. If you buy them, it’ll be a one-time expense. If you rent them, you might not be able to take your time using the tool or item.
Let Experts Install Your Artificial Turf in San Antonio, TX
Here at San Antonio Artificial Grass Pros, our expert installers can help you design and set up your installation. All you have to do is tell us how you want your putting green to turn out and our team will make it happen in no time.